10 Technical data
10.2 Mechanical
The housing is in austenitic alloy stainless steel,
corrosion and heat resistant according to the
following standards:
• AISI 316L
• UNI 6900-71: X 2 Cr Ni Mo 17 12 2
• DIN 17006: X 2 Cr Ni Mo 17 13 2
• N° werkstoff 1.4404
• AFNOR: Z2 CND 17-12
• BSI: 316S11
The screws utilised are in austenitic alloy stainless
steel, corrosion and heat resistant according to the
following standards:
• ISO: 7380
• AISI: 316
• ISO quality: A4
• Resistance class ISO: from 50 to 70
External body polishing
Flange thickness (front/back): 6mm (0.24in)
External dimensions (ØxL): 154x358mm (6.1x14.1in)
Internal usable area (WxH): 88x86mm (3.5x2.9in)
(front surface dimensions), 88x86mm (3.5x3.4in) (rear
surface dimensions)
Internal usable length (with heater): 210mm (8.3in)
Cable glands: 2xPG13.5 (nickel-plated brass for
external connections)
Gaskets: High sealing O-ring
Unit weight: 5kg (11lb)
8
10.3 Housing's window
Window with extra clear tempered glass
• Usable diameter: 97mm (3.8in)
• Thick: 4mm (0.16in)
10.4 Electrical
Power absorbed in input/Available power for camera
(selectable with dip-switch)
• PoE input Class 3 (13W): PoE camera Class 2 (7W)
• Hi-PoE input Class 4 (25W): PoE camera Class 3
(13W)
Data line: 10/100Base-T
Heater
• PoE input Class 3: 3W, Ton 15°C±3°C (59°F ±5°F),
Toff 22°C±3°C (72°F±5°F)
• Hi-PoE input Class 4: 7W, Ton 15°C±3°C (59°F
±5°F), Toff 22°C±3°C (72°F±5°F)
Demisting: 1W
Compatible with IEEE 802.3af, IEEE 802.3at/PoE Plus
10.5 Environment
For indoors and outdoors installation
Submersible: up to -40m (-130ft) (pressure: 4bar)
Operating temperature (with wide range cameras, in
Hi-PoE version Hi-PoE): from -20°C (-4°F) up to +60°C
(140°F)
10.6 Certifications
Electrical safety (CE): EN60065
Electromagnetic compatibility (CE): EN50130-4,
EN61000-6-3
IP protection degree (EN60529): IP66, IP67, IP68, IP69
EAC certification
MNVCNXM36HIPOE_1925_EN