Mitsubishi Electric ME-RTU Bedienungsanleitung Seite 293

CAPABILITIES AND CURRENT SETTINGS FOR DEVICE DATABASE
2.6 Analog Outputs and Analog Output Commands
Item
Analog Output Status Group
Number: 40
Analog Outputs Group Number: 41
Analogue Output Events Group
Number: 42
Analogue Output Command
Events Group Number: 43
1. Static Analog Output Status
Variation reported when vari-
ation 0 requested or in
response to Class polls:
2. Analog Output Status
Included in Class 0 response:
3. Reports Output Command
Event Objects:
4. Event Variation reported
when variation 0 requested or
in response to Class polls:
5. Command Event Variation
reported when variation 0
requested or in response to
Class polls:
6. Event reporting mode:
When responding with event data
and more than one event has
occurred for a data point, an Outsta-
tion may include all events or only
the most recent event.
7. Command Event reporting
mode:
When responding with event data
and more than one event has
occurred for a data point, an Outsta-
tion may include all events or only
the most recent event.
8. Maximum Time between
Select and Operate:
ME-RTU Remote Terminal Unit
Analog Outputs and Analog Output Commands
Capabilities
(leave tick-boxes blank if this data type is not
supported)

Variation 1 – 32-bit with flag

Variation 2 – 16-bit with flag

Variation 3 – single-precision floating point
with flag
ã Variation 4 – double-precision floating point
with flag
ã Based on point Index (add column to table in
part 5)

Always
ã Never
ã Only if the point is assigned to a class
ã Based on point Index (add column to table in
part 5)

Never
ã Only upon a successful Control
ã Upon all control attempts
ã Variation 1 – 32-bit without time
ã Variation 2 – 16-bit without time

Variation 3 – 32-bit with time

Variation 4 – 16-bit with time
ã Variation 5 – single-precision floating point
w/o time
ã Variation 6 – double-precision floating point
w/o time

Variation 7 – single-precision floating point
with time
ã Variation 8 – double-precision floating point
with time
ã Based on point Index (add column to table in
part 5)
ã Variation 1 – 32-bit without time
ã Variation 2 – 16-bit without time
ã Variation 3 – 32-bit with time
ã Variation 4 – 16-bit with time
ã Variation 5 – single-precision floating point
w/o time
ã Variation 6 – double-precision floating point
w/o time
ã Variation 7 – single-precision floating point
with time
ã Variation 8 – double-precision floating point
with time
ã Based on point Index (add column to table in
part 5)
ã Only most recent

All events
ã Only most recent
ã All events
ã Not Applicable
ã Fixed at _____ seconds

Configurable, range 1 ms s to 65535 ms
ã Configurable, selectable from ___,___,___seconds
ã Configurable, other, describe______________
ã Variable, explain _______________________
ã Based on point Index (add column to table in
part 5)
Current Value If configurable,
list methods
10000 Web interface
A - 39