Revision History - Mitsubishi Electric ME-RTU Bedienungsanleitung

REVISION HISTORY

(Applies to this entire document)
Version
2.00
2.01
2.02
2.03
2.04
2.05
2.06
2.07
2012
2013
ME-RTU Remote Terminal Unit
Date Reason for Changes
4-Jan-2007 Adapted from original DNP3 Subset Definitions and completely rewritten.
Changed DNP User Group to DNP Users Group and footer at bottom of page.
3-Feb-2007
Added serial port name. Formatting changes.
20-Feb-2007 Changed the description of Device Profile table entry 1.1.12
Updated 1.1.8 and 1.7.8 to indicate support for Function Code 31, Activate Con-
30-May-2007
figuration.
Removed object 0 from 1.1.8, and added secure authentication to the list.
Added new section 1.7.8 (re-numbering old 1.7.8 to 1.7.9) to show details of OS
requesting CON on last fragment of a multi-fragment response.
Added new sections 1.6.4 and 1.6.5 to show the action of the Master with con-
trol requests to off-line and off-scan devices.
Removed the reference to retry of control messages from 1.6.2
Added new sections 1.6.6 and 1.6.7 to describe the Master behaviour with
14-Nov-2008
respect to retries of control select messages.
Added new sections 1.6.8 and 1.6.9 for details of the master time accuracy of
issuing freeze requests.
Added section 1.6.10 for details of Master freeze time affected by polling or con-
trol requests.
Added new section 1.6.11 for details of how the Master schedules different requests.
Added new section 1.12 to show secure authentication parameters.
Added explanation of the use of the capabilities and current value columns to section 1.
Added details of identifying secure authentication version number to section 1.12.1
8-Dec-2008 Split section 1.12.4 into two sections to specify if devices "issue" aggressive
mode requests and if devices "accept" aggressive mode requests.
Added FC 129 and FC130 to the table in 1.12.15
Added capabilities cell to 1.3.12
Added capabilities cells to 1.10.1 and 1.10.3 to 1.10.8
Changed the reference to 1.10.1 in section 1 to 1.6.8
Changed section 3.5.3 as agreed at the Washington TC Meeting
Added references throughout the document to parameters that map to Device
4-May-2009 Attributes (Object Group 0).
Changed 1.1.8 topic "Self Address Reservation" to "Self Address Support".
Added clarification note to 1.7.2 and a cross-reference to 1.10.2
Extended the capabilities of 1.7.2 to include a range of values.
Changed the presentation of Device Profile section 1.2.4
Added Level 4 for Masters to section 1.1.7
Added the option of level 4 to section 1.1.7
Added details of device behavior with frozen analog and frozen counter objects
to section 3 (see 3.4.4, 3.4.8 and new sections 3.5.7 to 3.5.10)
23-Feb-2010
Created new part (5) to show details of Outstation Database Points, moving the
relevant sections from part 3 to this new part.
Added new parts to 1.2.6
Minor corrections to descriptions in sections 1.5.1, 1.5.3, 1.5.5, 1.5.6, 1.5.7, 1.8.4,
1.10.2, 3.1.3, 3.1.4, 3.2.3, 3.2.4, 3.3.3, 3.4.3, 3.4.7, 3.5.4, 3.5.9, 3.6.2, 3.7, 3.8.2 and 5.11.3.
Added new section 1.13 describing broadcast functionality
July-2012 Section 2 (Mapping between DNP3 and IEC 61850) re-worked.
Updates to section 1.12 to reflect Secure Authentication V5 changes
Changes to section 3 to descriptions of variation 0 requests
Added notes to section 3 capabilities to leave blank if not supported
Added section 1.1.14 (Conformance Testing Details).
Added section 1.5.9, to define control status codes supported by the device.
Added details to 1.7.6 (Event Buffer Organization), which also affect details in
part 3.
Added section 1.7.10, to define the signature algorithm associated with the new
Nov-2013
object Group 0, variations 200 and 201.
Added section 1.7.11 (Requests Application Confirmation).
Added elements to the end of section 1.12 to meet the requirements of the
Secure Authentication test procedures.
Revised text in section 3 to align with IEEE 1815-2012.
A - 3