Application Layer - Mitsubishi Electric ME-RTU Bedienungsanleitung

DEVICE PROPERTIES
1.5

Application Layer

Item
1. Maximum number of octets
Transmitted in an Application
Layer Fragment other than File
Transfer:
This size does not include any trans-
port or frame octets.
l Masters must provide a setting
less than or equal to 249 to be
compliant.
l Outstations must provide a
setting less than or equal to 2048
to be compliant.
2. Maximum number of octets
Transmitted in aN Application
Layer Fragment containing
File Transfer:
3. Maximum number of octets
that can be Received in an
Application Layer Fragment:
This size does not include any trans-
port or frame octets.
l Masters must provide a setting
greater than or equal to 2048 to
be compliant.
l Outstations must provide
a setting greater than or equal
to 249 to be compliant.
4. Timeout waiting for Complete
Application Layer Fragment:
Timeout if all frames of a message
fragment are not received in the
specified time. Measured from time
first frame of a fragment is received
until the last frame is received.
5. Maximum number of objects
allowed in a single control
request for CROB (group 12):
6. Maximum number of objects
allowed in a single control
request for Analog Outputs
(group 41):
7. Maximum number of objects
allowed in a single control
request for Data Sets (groups
85, 86, 87):
8. Supports mixing object groups
(AOBs, CROBs and Data Sets) in
the same control request:
ME-RTU Remote Terminal Unit
Capabilities

Fixed at 2048
ã Configurable, range ________ to _______
ã Configurable, selectable from ____,____,____
ã Configurable, other, describe______________
ã Fixed at ___________
ã Configurable, range ________ to _______
ã Configurable, selectable from ____,____,____
ã Configurable, other, describe_______________

Fixed at 2048
ã Configurable, range ________ to _______
ã Configurable, selectable from ____,____,____
ã Configurable, other, describe_______________

None
ã Fixed at______ ms
ã Configurable, range _______ to _______ms
ã Configurable, selectable from ___,___,___ms
ã Configurable, other, describe_______________
ã Variable, explain _______________________

Fixed at 10 (enter 0 if controls are not sup-
ported for CROB)
ã Configurable, range ________ to _______
ã Configurable, selectable from ____,____,____
ã Configurable, other, describe_______________
ã Variable, explain _______________________

Fixed at 10 (enter 0 if controls are not sup-
ported for Analog Outputs)
ã Configurable, range ________ to _______
ã Configurable, selectable from ____,____,____
ã Configurable, other, describe_______________
ã Variable, explain _______________________

Fixed at 0 (enter 0 if controls are not sup-
ported for Data Sets)
ã Configurable, range ________ to _______
ã Configurable, selectable from ____,____,____
ã Configurable, other, describe_______________
ã Variable, explain _______________________
ã Not applicable – controls are not supported
ã Yes

No
Application Layer
If configurable,
Current Value
list methods
A - 15