Mitsubishi Electric ME-RTU Bedienungsanleitung Seite 288

Binary Outputs and BO Commands
2.3 Binary Outputs and BO Commands
Item
Binary Outputs Group Number: 10
Binary Output Events Group
Number: 11
Binary Output Commands Group
Number: 12
Binary Output Command Events
Group Number: 13
1. Minimum pulse time allowed
with Trip, Close, and Pulse On
commands:
2. Maximum pulse time allowed
with Trip, Close, and Pulse On
commands:
3. Binary Output Status included
in Class 0 response:
4. Reports Output Command
Event Objects:
5. Static Variation reported
when variation 0 requested or
in response to Class polls:
6. Event Variation reported
when variation 0 requested or
in response to Class polls:
7. Command Event Variation
reported when variation 0
requested or in response to
Class polls:
8. Event reporting mode:
When responding with event data
and more than one event has
occurred for a data point, an Outsta-
tion may include all events or only
the most recent event
9. Command Event reporting
mode:
When responding with event data
and more than one event has
occurred for a data point, an Outsta-
tion may include all events or only
the most recent event
10. Maximum Time between
Select and Operate:
11. Binary Outputs Event Buffer
Organization:
When event buffers are allocated per
object group (see part 1.7, no. 6.),
indicate the number of events that
can be buffered for Binary Outputs. If
event buffers are not allocated per
object group then set "Fixed at 0".
12. Binary Output Commands
Event Buffer Organization:
When event buffers are allocated per
object group (see part 1.7, no. 6.),
indicate the number of events that
can be buffered for Binary Output
Commands. If event buffers are not
allocated per object group then set
"Fixed at 0".
A - 34
CAPABILITIES AND CURRENT SETTINGS FOR DEVICE DATABASE
Capabilities
(leave tick-boxes blank if this data type is not
supported)

Fixed at 100ms (hardware may limit this further)
ã Based on point Index (add column to table in
part 5)
ã Fixed at ______ms (hardware may limit this
further)
ã Based on point Index (add column to table in
part 5)

Always
ã Never
ã Only if the point is assigned to a class
ã Based on point Index (add column to table in
part 5)

Never
ã Only upon a successful Control
ã Upon all control attempts
ã Variation 1 – packed format

Variation 2 – output status with flags
ã Based on point Index (add column to table in
part 5)
ã Variation 1 – status without time
ã Variation 2 – status with time
ã Based on point Index (add column to table in
part 5)
ã Variation 1 – command status without time
ã Variation 2 – command status with time
ã Based on point Index (add column to table in
part 5)
ã Only most recent

All events
ã Only most recent
ã All events
ã Not Applicable
ã Fixed at _____ seconds

Configurable, range 1 ms to 65535 ms
ã Configurable, selectable from___,___,__ seconds
ã Configurable, other, describe________________
ã Variable, explain _______________________
ã Based on point Index (add column to table in
part 5)

Fixed at 100
ã Configurable, range _______ to _______
ã Configurable, selectable from ____,____,____
ã Configurable, other, describe_______________
ã Fixed at ___________
ã Configurable, range _______ to _______
ã Configurable, selectable from ____,____,____
ã Configurable, other, describe_______________
Current Value If configurable,
list methods
10000 Web interface