Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - BWT Infinity M Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Infinity M:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Maintenance

Maintenance
Maintenance
Maintenance
Maintenance
GB
GB
GB
GB
GB
All technical equipment requires regular mainte-
nance. This should always be carried out by
qualified staff, who will also replace any worn parts.
Maintenance must be carried out once a year, or
twice a year for communal installations.
To be carried out by: installer or manufacturer.
T T T T T roub
roub
rouble-shooting
roub
le-shooting
le-shooting
le-shooting
roub
le-shooting
Fault
Fault
Fault
Fault
Fault
Water pressure dropped consid-
erably in network
Flushing water outlet does not
close
Flushing water outlet leaks
If the fault cannot be rectified using these notes, please contact a specialist firm or our
If the fault cannot be rectified using these notes, please contact a specialist firm or our
If the fault cannot be rectified using these notes, please contact a specialist firm or our
If the fault cannot be rectified using these notes, please contact a specialist firm or our
If the fault cannot be rectified using these notes, please contact a specialist firm or our
Customer Service.
Customer Service.
Customer Service.
Customer Service.
Customer Service.
1 4
1 4
1 4
1 4
1 4
W W W W W arr
arr
arr
arranty
arr
In the event of a failure during the warranty period,
please contact our Customer Service Department,
quoting the equipment type and the PNR =
production number (see technical data or rating
plate on equipment).
Warranty work may only be carried out by our
Warranty work may only be carried out by our
Warranty work may only be carried out by our
Warranty work may only be carried out by our
Warranty work may only be carried out by our
Customer Service Department.
Customer Service Department.
Customer Service Department.
Customer Service Department.
Customer Service Department.
Warranty work by a specialist firm requires the
express consent of our Customer Service Man-
ager.
Cause
Cause
Cause
Cause
Cause
Dirty filter element
Backwash element does not
reach the end position due to
large particles of dirt
Defective seal
anty
anty
anty
anty
Solution
Solution
Solution
Solution
Solution
Carry out backwash
Repeat backwash several
times
Pull cover plate (8 8 8 8 8 ) down and
close flushing water outlet
with safety stop valve (7 7 7 7 7 ).
Have seal replaced by spe-
cialist firm.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis