Concept ZN 8022 Bedienungsanleitung Seite 34

EN
• Unplug the unit from the power source before filling the water tank.
• The filling hole cannot be open during operation.
• When connecting and unplugging the unit, set the temperature regulator to the minimum.
• The unit must be used and stored on a stable surface.
• Make sure the ground on which the stand is placed is stable, when putting the unit on the stand.
• Do not use the unit if it has been dropped, if there is any visible damage, or if it does not seal.
• Do not repair the appliance yourself. Contact an authorized service center.
• Prevent any contact of the power cord with hot surfaces.
• High temperature during operation can cause burns.
• Make sure the power cord does not overhang the working area, and that children cannot reach it.
• Store the unit in a vertical standing position. Let the unit cool down before storing it. Do not touch the hot
surfaces.
Failure to follow the manufacturer's instructions may lead to refusal of warranty repair.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
PRODUCT DESCRIPTION
1. Filling hole cover
2. Steam volume regulator
3. Spray button
4. Steam button
5. Automatic OFF indicator (ZN8009)
6. Temperature controller
7. Supply cable joint
8. Heating indicator
9. Ironing surface
10. Water tank
11. Self-clean button
12. Spray nozzle
Accessories
A Water tank
32
34
(ZN 8032)
2
1
1
12
12
A
A
3 4 5
5
4
3
2
11
11
EN
7
6
9
10
10
ZN8007, 8009
ZN 8022 | ZN 8032
7
8
6
8
9