Clatronic mc 1025 cd Bedienungsanleitung Seite 49

STOP (18/D)
The CD is stopped.
REPEAT/PROG (21)
Press once:
Press a second time: The whole CD is played continuously (REPEAT ALL ap-
Press a third time:
RANDOM (22)
Press once:
Press a second time: All functions are cancelled. The normal play mode is resu-
Programmed Playback
This permits programming of any desired order of tracks.
1. Press STOP.
2. Press the REPEAT/PROG button (21). The letters 01 fl ash in the display. Now
select the song using SKIP - / + . Press REPEAT/PROG again. The letters 02
fl ash in the display. Put in the next track, etc.
3. Start the CD player. The programmed tracks begin to play
4. In order to delete a programme press STOP.
The device stops automatically once the entire sequence of programmed tracks is
completed.
It is also possible to combine the programmed tracks with the REPEAT function.
After you have programmed and started the device, please press the REPEAT/
PROG button (21) up to three times and then you can use the functions as descri-
bed under „REPEAT".
Note Compact Disks:
• This device is able to play CDs with a diameter of 8 cm and 12 cm.
Note: Only place one disc in the CD compartment at a time.
• Only audio CDs, CD-R and CD-RW disks can be played on this machine.
• Always place the CD into the CD compartment with the label facing upwards.
Compact discs can only be played on one side.
• Fingerprints and dust should be carefully removed from the recorded side of
the CD (the side without the label) with a soft cloth. Wipe off in straight lines
from the centre to the edge.
• After being played, CDs should be returned to their case so that they do not
become scratched.
05-MC 1025 CD 49
The current track is repeated continuously (REPEAT
appears in the display)
pears in the display)
The function is deactivated and the CD is played in the
normal mode.
The display (5) contains the word RANDOM and the track
number that is to be played fi rst. All tracks are played back
in random order.
med.
GB
49
08.06.2005, 9:31:33 Uhr