Herunterladen Inhalt Inhalt Diese Seite drucken

Notes; Receiving The Product; Inspecting The Packaging; Scope Of Delivery - Grundfos SB Serie Montage- Und Betriebsanleitung

Vorschau ausblenden Andere Handbücher für SB Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 48
The hazard statements are structured in the
following way:
SIGNAL WORD
Description of hazard
Consequence of ignoring the warning.
- Action to avoid the hazard.

1.2 Notes

The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
Observe these instructions for explosion-
proof products.
A blue or grey circle with a white graphical
symbol indicates that an action must be
taken.
A red or grey circle with a diagonal bar,
possibly with a black graphical symbol,
indicates that an action must not be taken
or must be stopped.
If these instructions are not observed, it
may result in malfunction or damage to the
equipment.
Tips and advice that make the work easier.
6

2. Receiving the product

2.1 Inspecting the packaging

On receipt of the product, do the following:
1. Check that the product is as ordered. If the
product is not as ordered, contact the supplier.
2. Check that no visible parts have been damaged.
If any visible parts have been damaged, contact
the transport company.

2.2 Scope of delivery

The box contains the following items:
1 pump
1 adapter
1 installation and operating instructions
1 quick guide
1 floating inlet strainer, for side inlet variant only
1 non-return valve, for SB only.

3. Installing the product

Observe local regulations concerning
limits for manual lifting or handling.
CAUTION
Crushing of feet
Minor or moderate personal injury
- Use safety shoes when handling the
pump.
DANGER
Electric shock
Death or serious personal injury
- Switch off the power supply before you
start any work on the product. Make
sure that the power supply cannot be
accidentally switched on.

3.1 Location

Install the pump in a frost-free location.
Before the pump is submerged in the well or tank,
make sure that the well or tank does not contain
sand or solid sediment.
Install the pipe so that the pump is not exposed to
mechanical stress.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sba serieSb hf serie

Inhaltsverzeichnis