Device Description; Intended Use; Prerequisites; Hardware - Bosch KTS 5a Serie Originalbetriebsanleitung

en | 16 | KTS 560 / 590 (KTS 5a Series) | Device description
3.

Device description

3.1

Intended use

KTS 560 / 590 (KTS 5a Series) - referred to as KTS
modules in the following - are modules for controller
diagnosis. The functionality differences are shown in
the following table:
Function
Control unit diagnosis
1 channel multimeter
2 channel multimeter
2 channel oscilloscope
2 channel diagnosis oscilloscope
Bluetooth radio link
USB link
!
If the KTS 560 / 590 (KTS 5a Series) and the sup-
plied accessories are operated contrary to the
way specified by the manufacturer in the operat-
ing instructions, the protection provided by the
KTS 560 / 590 (KTS 5a Series) and the supplied
accessories may be compromised.
KTS modules can perform the following functions with
ESI[tronic] 2.0:
R
Control unit diagnosis, with e.g.
$
read fault memory
$
Clearing the fault memory
$
display actual values
$
activate actuators
$
use other specific control unit functions
R
Multimeter measurements for
$
Voltage measurement
$
resistance measurement
$
Current measurement (only with special accesso-
ry current measuring clips)
R
2-channel oscilloscope for determining measure-
ment values (KTS 590 only).
R
2-channel diagnosis oscilloscope for testing the
controller diagnosis interface (KTS 590 only).
|
1 689 989 223 2019-03-04
3.2
The KTS 560 / 590 (KTS 5a Series) can only be operat-
ed from a computer and with the ESI[tronic] software.
3.2.1
R
Computer with operating system Windows 7, Win-
dows 8 or Windows 10
KTS 560 KTS 590
R
DVD drive
R
x x CPU (processor) with 2 GHz or more
x x R
Hard drive with at least 5 GB of free storage space
– x
R
4 GB of RAM or more
– x
R
Two vacant USB ports for the Bluetooth USB adapt-
– x
er and for a USB connecting cable
x x
x x
3.2.2
In order to operate the KTS module, the current ES-
I[tronic] 2.0 software must be installed and licensed on
the computer. This is subject to additional cost.
3.3
i
The scope of delivery depends on the product variant
ordered as well as the special accessories ordered,
and can deviate from the following list.
Designation
Diagnostic device KTS 560
Diagnostic device KTS 590
Bluetooth USB adapter
OBD connection cable, 1.5 m
USB connection cable 3 m
Power supply unit
Measurement cable blue/yellow
Measurement cable red/black (KTS 590 only)
Measuring clamp black
(1x on KTS 560, 2x on KTS 590)
Test prods
Test prods
Protective cap
Case
DVD ESI[tronic] 2.0 A1
DVD ESI[tronic] 2.0 B1
Mounting bracket with 3 oval-head screws
Important information and safety instructions
Instruction manuals
3.4
Information on optional accessories, such as vehi-
cle-specific connection cables, extra measurement ca-
bles and connection cables can be obtained from your
Bosch authorized dealer.

Prerequisites

Hardware

Software

Scope of delivery

Special accessories

Order number
–
–
–
1 684 465 755
1 684 465 562
1 687 023 736
1 684 463 950
1 684 463 945
1 681 354 035
1 683 050 050
1 684 480 125
1 680 591 037
1 685 438 648
1 987 P12 037
1 987 729 601
–
1 689 979 922
1 689 989 223
1 689 989 266
1 689 989 277
Robert Bosch GmbH