Wireless Connections; Bluetooth; Bluetooth Usb Adapter; Troubleshooting - Bosch KTS Truck Originalbetriebsanleitung

en | 14 | KTS Truck |
3.7

Wireless connections

i
Users of wireless systems are responsible for
compliance with the applicable directives and
restrictions in the country concerned.
A "wireless system" in the sense of the European
Directive RED 2014/53/EU (Radio Equipment
Directive) is an electrical or electronic product
(component) that transmits and/or receives radio
waves as permitted for the purpose of wireless
communication and/or radiolocation.
WLAN and Bluetooth instructions can be found in the
separate instructions "Data protection, data security,
wireless connections".
http://mediathek.bosch-automotive.com/files/common/documents/1689/989393.pdf
These instructions must be carefully studied prior to
start-up, connection and operation of the KTS Truck
and must always be observed.
3.8

Bluetooth

3.8.1

Bluetooth USB adapter

The Bluetooth USB adapter included in the scope of
delivery is inserted into the PC/laptop and provides
a radio link to components of KTS Truck capable of
wireless communication.
3.8.2

Troubleshooting

i
In the event of problems with the Bluetooth radio
link, refer to the information in the separate
instruction "Bluetooth USB Adapter".
http://mediathek.bosch-automotive.com/files/bosch_wa/989/277.pdf
3.9 Information on
Bosch Connected Repair
The "Bosch Connected Repair" software (CoRe)
makes it possible to exchange customer and vehicle
information as well as protocols in the workshop.
For this, the testers (CoRe clients) are connected to
a central computer (CoRe server) via the computer
network.
Related documents:
Current overview of products supporting
Bosch Connected Repair:
http://mediathek.bosch-automotive.com/files/common/documents/1689/989386.pdf
Notes on system requirements, installation and other

information on Bosch Connected Repair:

http://mediathek.bosch-automotive.com/files/common/documents/1689/989372.pdf
|
1 689 989 100 2022-01-04
3.

Product description

3.1

Use

KTS Truck is a module for performing control
unit diagnosis on trucks, trailers, buses and light
commercial vehicles (LCV). Communication between
the PC/Laptop and the KTS Truck can take place
either by way of a Bluetooth connection or a USB
connection.
R
ESI[tronic] 2.0 provides the following control unit
diagnosis options for example:
$
read DTCs
$
Erase fault memory
$
display actual values
$
Actuator activation and
$
use other specific control unit functions
R
ESI[tronic] 2.0 permits switching to ESI[tronic]
to obtain access to the full scope of Bosch motor
vehicle equipment.
3.2

Prerequisites

3.2.1

Hardware

R
Operating system Windows 8 or Windows 10
R
CPU (processor) 1.6 GHz or higher
R
At least 100 GB of free hard drive space
R
4 GB of RAM or more
R
Display resolution of 1024 x 600 pixels or higher
R
LAN: 10/100 Mbit/s, WLAN: 802.11b/g/n
R
6 Mbit/s or higher
R
Two vacant USB ports for the Bluetooth USB
adapter and for a USB connecting cable
3.2.2

Software

To operate the KTS Truck, the latest version of
ESI[tronic] 2.0 must be installed on the PC/laptop and
licensed.
Robert Bosch GmbH