Delivery Specification; Special Accessories; System Tester; Diagnosis Terminals - Bosch KTS 5 Serie Originalbetriebsanleitung

3.3

Delivery specification

Description
System tester KTS 525 (KTS 5 Series)
Bluetooth USB Adapter
OBD diagnosis cable 1.5 m
USB connection cable 3 m
Power pack
Case
Mount
with sheet-metal screw (2x)
and fillister head screw (3x)
Important information and safety instructions
Original instructions
3.4

Special accessories

Information on special accessories, such as vehicle-
specific connecting cables, can be obtained from your
authorized Bosch dealer.
3.5

System tester

3.5.1

Diagnosis terminals

Fig. 1: Diagnosis terminals
1 Connection OBD diagnosis cable (DIAG)
3.5.2

Terminal strip

15V
Fig. 2: Terminal strip
1 Power supply connection
2 LED A and LED B (see chap. 3.5.3)
3 USB connection
Robert Bosch GmbH
Order Number
–
*)
–
1 684 465 555
1 684 465 562
1 687 023 693
1 685 438 648
–
1 689 979 922
1 689 989 171
DIAG
459802_12-Ko
1
459908_01_We
| KTS 525 (KTS 5 Series) | 15
3.5.3

Functions of LEDs A and B

Status LED A
KTS 525 ready for Does not
operation illuminate
Data communication Flashes green
with the controller (irregular)
Firmware update Does not
in operation illuminate
LED A Function
Does not No data
illuminate communication with
the controller
Flashes green Data communication
(irregular) with the controller
Illuminated green Fault in hardware/
Firmware
Illuminated red Power supply
> 35 Volt.
LED B Function
Does not Voltage not present
illuminate
Flashes green KTS 525 ready for
(1 second operation
interval)
Illuminated green Fault in hardware/
Firmware
Flashes yellow Overvoltage on
(1 second diagnostic cable
interval)
Illuminated yellow Fault in hardware/
Firmware
Flashes red Firmware update
(irregular) in operation
Illuminated red Fault in firmware-
update
Unplug the USB connection and power supply and connect them
*)
again. If the error still exists, contact customer service.
3.5.4 Adapter insert (IBox 01)
The adapter insert (fig. 3, item 6) includes all currently
known options for establishing communications with
the diagnostic connectors. The adapter insert can
be changed quickly and without tools so that future
expansions of communication protocols can be adapted
in a flexible way.
i
KTS modules can only function with an adapter
insert plugged in.
en
LED B
Flashes green
(1 second interval)
Flashes green
(1 second interval)
Flashes red
(irregular)
Measures
Check connection
with the controller
None
*)
Check voltage in
vehicle
Measures
Check power
supply
None
*)
*)
*)
None
Repeat firmware
update
|
1 689 989 171 2019-01-04