Appliance Description; Handling And Operation; Suitable Laminating Pouches; Switching Levels - UNITED OFFICE ULG 350 B1 Bedienungsanleitung Und Sicherheitshinweise

Appliance description

1 Pouch slot for manual pouch insertion
Power indicator light (appliance switched on)
2
3 Ready indicator light (ready for use)
4 Anti-blocking switch and pouch thickness switch
5 On/Off switch (ON/OFF)
6 Selector switch for hot and cold lamination (HOT/COLD)
7 Pouch ejector slot

Handling and operation

In this chapter you will receive important information about the handling and
operation of the appliance .

Suitable laminating pouches

For hot lamination you can use pouches with a width of up to 230 mm and a
maximum thickness of 125 micron . For cold lamination you can use pouches with
a maximum thickness of 200 microns . Please note that each laminating pouch
may only be used once .
NOTICE
► For hot lamination, use only laminating pouches that are expressly
intended for hot lamination .
► For cold lamination, use only laminating pouches that are expressly
intended for cold lamination .
► Take note that the laminating pouches supplied with the laminator are
intended exclusively for hot lamination .

Switching levels

Selector switch
position
Cold
NOTICE
► For high-gloss photos, you should select the switch position "125" as well
as the appropriate pouch thickness .
ULG 350 B1
Pouch thickness
6
switch
Hot
Hot
Laminating pouch
position
4
80
125
125
thickness
> 60 - 80
85 - 125
to 200
GB │ IE │ 21 ■