Herunterladen Inhalt Inhalt Diese Seite drucken

Connect Peripheral Equipment; Via The Euroconnector; Via Ant Input; Decoder - Tech Line TL 32 LC 700 Bedienungsanleitung

Tft-farbfernsehgerät mit fernbedienung
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

and save the 10 pages including the re-
quested page into memory after finding it.
For Fastext
The subject-heading for the information may
have a particular color.
• Press an appropriate RED, GREEN, YELLOW
or BLUE button in order to reach the relevant
page quickly.
For TOP text
TOP text mode of operation will be activated
automatically according to the transmission.
• If TOP text transmission is present, color
coded buttons will appear in status row.
• If TOP text transmission is not present, sta-
tus row will not appear.
The subject-heading for information may be
located in colored box.
In Top mode the
"
mands will request the next or previous page
respectively. If TOP text transmission is not
available, in case of operation of these com-
mands, wraparound occurs. For example
page 100 appears to be one greater than
page 199.
-P/CH" or "P/CH+ " com-
Connect Peripheral
Equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show
you where the different (Optional) equipment
should be connected at the back or right
side of the TV.

Via The Euroconnector

TFT TV has 2 Euroconnector sockets. If you
want to connect peripherals (e.g. video, de-
coder, etc.) which have Euroconnectors, to
the TV, use SCART 1 or SCART 2 inputs.
If an external device is connected via
Euroconnector sockets TV is switched to AV
mode automatically. If the signal is RGB, se-
lect RGB in the source select menu to view
picture. If the external device is connected to
SCART 1, choose Scart 1 RGB. If the exter-
nal device is connected to SCART 2, choose
Scart 2 RGB.

Via Ant Input

If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have
Euroconnector, you should connect it to the
ANT input of the TV.
If the VCR is connected via antenna input
it is suggested to use the Programme 0.

Decoder

Cable TV offers you a wide choice of pro-
grams. Most of them are free, others are to
be paid for by the viewer. This means that
you will need to subscribe to the broadcast-
ing organisation whose programmes you
wish to receive. This organisation will supply
you a corresponding decoder unit to allow
the programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
- 53 -

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis