Programming Menu - Tech Line TL 32 LC 700 Bedienungsanleitung

the beginning of the Programme Name,
pressing " " button moves the cursor at the
end.
country
By pressing " " / " " button, select country.
" right/left to change country" is seen on
the screen. By pressing " " / " " button, you
should select the country where you are.
autoset
By pressing " " / " " button, select autoset.
"<ok> to activate
screen. When " " / " " or "OK" button is
pressed, the following menu comes to the
screen. If you want to cancel autoset func-
tion, press "M" button. You return to aps
menu.
If you press "M" button after autoset is
started, program table appears on the
screen.
All prestored programs
will be deleted
<M>
If "OK" button is pressed, autoset function
starts and the following menu comes to the
screen.
channel searching
please wait or
press menu to cancel
After autoset is finalized, the program table
comes to the screen.

programming menu

By pressing " " / " " button in tv tuner
menu select the first icon. Programming
menu appears on the screen.
autoset" is seen on the
<OK>
cancel start
programming
program
fine tune
channel
standard
channel type
edit labels
store program
manual search
down to programming options
program
By pressing " " / " " button, select pro-
gram. " right/left to select program" is seen
on the screen. By pressing " " / " " button,
you can select the program number. You
can also enter a number via digit buttons on
the remote control. There are 100 program
storage between 0 and 99.
fine tune
By pressing " " / " " button, select fine
tune. " right/left to adjust fine tuning" is
seen on the screen. By pressing " " / " "
button, you can adjust the tuning. The adjust
values are between -50 and +50.
channel
By pressing " " / " " button, select channel.
" right/left to change channel" is seen on
the screen. By pressing " " / " " button, you
can change the channel number. You can
also enter a number via digit buttons on the
remote control. The adjust values change
according to the standard and channel type.
standard
By pressing " " / " " button, select stan-
dard. " right/left to change standard" is
seen on the screen. By pressing " " / " "
button, you can change the standard to B/G,
D/K, I or L/L'.
channel type
By pressing " " / " " button, select channel
type. "right/left to change channel type" is
- 48 -
15
türkiye 0
8
B/G
S
C