Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - LIVARNOLUX IAN 295689 Montage-, Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

  • DEUTSCH, seite 39
Then also loosen the three screws
underside of the cover counter-clockwise us-
ing a suitable cross-tip screwdriver and remove
the cover
from the remainder of the module
11
(see Fig. E).
Remove the rechargeable battery
place with a new, charged rechargeable bat-
tery of the same type (see „Technical data").
Please note the polarity (+ / -) when inserting
the rechargeable battery (see Fig. F).
Now reattach the cover
Make sure the cover
(see Fig. F). Secure clockwise using the three
screws
.
10
Then reattach the housing
clockwise using the two screws
Reattach the solar module
tube
or
.
2
3
Slide the On / Off switch
again.
Screw the sphere
module
, turning clockwise.
5
12 GB/CY
on the
10
and re-
12
to the solar cell
11
is in correct position
11
and secure
9
.
8
to the spacer
5
to the ON position
7
all the way into the solar
4

Troubleshooting

Note: The product contains sensitive electronic
components. Radio transmitting equipment in the
immediate vicinity may therefore cause interference.
These could be e.g. mobile phones, two-way radios,
CB radios, radio / other remote controls and micro-
waves. If you notice the product is malfunctioning,
remove any sources of interference from the area
around the product.
.
13
Notice: Electrostatic discharge can lead to mal-
functions. In the event of such malfunctions, briefly
remove and reinsert the rechargeable batteries.
Note: The performance of the rechargeable
battery is better in summer than in winter due to
the weather.
Error
Cause
LED
Surroundings
doesn't
are too bright
light up
or light from
other light
sources is hit-
ting the prod-
uct
Solution
Change the location
(away from e.g. yard
or street lighting)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 295691Ian 295713

Inhaltsverzeichnis