Initial Setup; Filling The Container; Operation; Transport - CEMO DT-Mobil Easy 460l Bedienungsanleitung

3. Initial setup

Important:
The mobile diesel filling station DT-Mobile Easy
460 L / 600 L / 980 L must be permanently provided
with the sticker UN1202 for diesel, the sticker
"environmentally hazardous substances"
(tree - fish) and the hazard label (flame on red
background) on the prepared place on the front
and rear.
The stickers are enclosed with the tank papers.
environmentally
UN number
hazardous substances
environmentally
UN number
hazardous substances

4. Filling the container

• Unscrew cap (item b), (alternative item g at
980 l) with integrated ventilation valve (item a)
on the filling opening. The container may only
be filled with a self-closing delivery nozzle.
• After filling, the cap must be screwed on tight
again.
• Contamination of the container caused by the
filling must be removed immediately with a dry
cloth.
• Cap (item. e) for the optional installation of a
level indicator for checking the fill level.
DT-Mobile
Easy 600
Hazard label
f
DT-Mobile
Easy 980
Hazard label

5. Operation

5.1 Transport

Four brackets (item c) are
attached to the side of the tank
for securing the DT-Mobile
Easy 460 L / 600 L / 980 L to
the transport vehicle. Suitable
tensioning belts must be used
for this.
The pertinent regulations for securing loads must
be observed, in particular the STVO (Highway
Code), VDI (Association of German Engineers)
guidelines and European standard CEN 12195
Parts 1-4 (calculation and lashing).
The place on which the tank is positioned on or
in the transport vehicle must be level, stable and
free from sharp objects. We recommend the use
of a non-slip mat for this!
c
a b
e g
GB
a
b
e
d
DT-Mobile Easy 600
d
f
DT-Mobile Easy 980
23