Olimpia splendid PELER CHILL Gebrauchs-, Installations- Und Wartungsanweisungen Seite 23

3- OPERATING INSTRUCTIONS
1. Connect the plug to the mains.
When the appliance is switched on for the first time, it emits two
"beeps" and goes into standby.
2. Press the ON/OFF key (A) to switch on the appliance (it beeps once).
3. Press the ON/OFF key (A) again to switch off the appliance (a long beeeep is
emitted).
A beep sound is emitted each time a key is pressed.
A - ON-OFF key:
When the cooler is in a stable position, press the "On / Off" button. The appliance
beeps twice and the fan starts running. The speed mode can then be selected by
pressing the speed button on the control panel.
B - Fan speed adjustment key
After switching on the fan, press the "B Speed" button to adjust its speed. It can
be set to 3 levels: Low, Medium, High. The display shows the selected speed.
C - Ventilation mode key
When the fan is running, press the "C Mode" button to set the ventilation mode.
It can be set in 3 modes: Normal, Natural and Standby. The display shows the
selected mode.
D - Timer function
When the cooler is running, press the "D Timer" button to set the switch-off time.
Once the "Timer" button is pressed, the display shows the set time. The timer can
be set between 0.5 and 9.5 hours in 0.5-hour intervals. The display shows the
ambient temperature and the set time alternatively. After the set time, the cooler
stops.
EN - 9
PELER CHILL