Standard Operation Conditions; Auto Random Re-Start Function; Service And Maintenance - Acson IM-CKB-0501- B-Series Bedienungsanleitung

Wärmetauscherflächen

Inhaltsverzeichnis

Verfügbare Sprachen

Cooling unit

Temperature

Ts °C / °F

Minimum indoor

19.4 / 66.9

temperature

Maximum indoor

26.7 / 80.1

temperature

Minimum outdoor

19.4 / 66.9

temperature

Maximum outdoor

46 / 114.8

temperature

•

Disconnect from the main power supply before servicing the air conditioner unit.

•

DO NOT pull out the power cord when the power is ON. This may cause serious electrical shocks which may result

in fire hazards.

If there is a power cut when the unit is operating, it will automatically resume the same operating mode when the power is

restored. (Applicable only to units with this feature)

Before turning off the power supply, set the remote controller's ON/OFF switch to the "OFF" position to prevent the

nuisance tripping of the unit.

If this is not done, the unit's fans will start turning automatically when power resumes, posing a hazard to service

personnel or the user.

Service Parts

Indoor air filter

1. Remove any dust adhered on the filter by using a vacuum cleaner or

2. Rinse well and dry the filter before placing it back onto the unit.

3. Do not use gasoline, volatile substances or chemical to clean the filter.

Indoor unit

1. Clean any dirt or dust on the grille or panel by wiping it using soft cloth

2. Do not use gasoline, volatile substances or chemical to clean the indoor

Do not operate any heating apparatus too close to the air conditioner unit. This may cause the plastic panel to melt or

deform as a result of the excessive heat.