Installation and connection of the appliance / Technical details
Installing the appliance
• The stability of the furniture must comply with DIN 68930.
• On the built-in niche no back wall may be present, so that
the ventilation is ensured.
• Push the device all the way into the niche.
• Open the oven door and fasten the left and right with the
supplied four screws and sleeves on the cabinet. Do not
overtighten the screws.
Turning on the appliance
Remove all packaging materials and possibly remove protec-
tive films.
• Clean the oven and the accessories just moist.
• Set the current time to the timer (on some models only).
• Operate the empty oven for about 30 minutes with top
and bottom heat and maximum temperature. The resul-
ting typical smell of a brand is unavoidable. Please ven-
tilate the room.
Technical details
Oven model name
Supplier's name
Energy efficiency index (EEI
Energy class
Energy consumption per cycle in
forced air mode
Energy consumption per cycle in con-
ventional mode
Number of cavities
Heat source per cavity
Volume of each cavity
38
EB8012EDP
KKT KOLBE
)
94
cavity
A
0.79 KWh/cycle
0.99 KWh/cycle
1
Electricity
70 L