Programming; Choosing The Heating Type; Turn On The Oven Light; Time Options - KKT KOLBE EB8012EDP Benutzerhandbuch

Programming

Setting the clock
After you have connected the appliance to the mains,
the display will show:
Setting the clock
• Press the key and the hour display will flash.
• Rotate the selection knob K2 to adjust the hours.
• Press the key again to set the current minute time.
• Rotate the selection knob K2 to adjust the minutes.
• Press to finish clock setting. The „:" will now be shown
constantly and the appliance is ready to use.
Note
• When you disconnect the appliance from the mains, the
clock will be reset to
• The backlight of the clock turns off after about 10 minutes.

Choosing the heating type

• Rotate the function knob K1 to select your desired heating
type. The current type will be displayed right next to the
knob in the screen.
• After that, with the selection knob K2, you can select a
cooking temperature.
• Press the -key to start the process.
• If you haven't selected any time before, the appliance will
automatically turn off after a 9-h-timer.
Steps for the time settings:
0 - 30 minutes: 1 minute steps
30 minutes - 9 hours: 5 minute steps
Steps for the temperature settings:
Normal heating types: 5 °C steps
Grilling function: 30 °C steps
How to change the time and temperature while
cooking
• When the cooking process has already started, you can ad-
just the time easily. To do this, simply rotate the function
knob K1 to the desired value. After that, press the
validate your selection. When you don't validate, the appli-
ance will automatically go back to the old setting.
• You can adjust the temperature while the cooking process
has already started. For this, rotate the selection knob K2
to the desired value and validate with the
don't validate, the appliance will automatically go back to
the old setting.
32
and you have to set it again.
key to
key. When you

Turn on the oven light

• Rotate the function knob K1 until the icon
the display next to it.
• To turn on the light, validate your selection with the
After that, the light will be turned on.

Time options

While cooking process is running, it is possible to display
the remaining time/target time/current time.
• By pushing the key it is possible to display the remaining
/ target / current time. After 3 seconds the display will turn
back to the last displayed value.
• By pushing the key again, you can display the current time.

Key lock

To lock the keys:
• Push the buttons and at the same time for 3 seconds.
After that, a buzzer sound will appear and the icon will
light up.
To unlock the keys:
• By pushing the keys and
conds again, the icon will disappear and the keys will be
unlocked.
Please note:
Even when the key lock is activated, you can inter-
rupt a baking process by pushing the
push the key for a too long time, the appliance will
interpret the as invalid.

Reminder / alert

The oven has a reminder function, you can put in a period
of up to 9 hours. This function can be activated only when
the unit is in standby mode.
• Press the key .
• Rotate the selection knob K2 to adjust the hours.
• Press the key again.
• Rotate the selection knob K2 to adjust the minutes.
• Press to confirm your setting. The „:" will flash and the
icon will light up. From now on, the count-down will start.
Note:
The alarm signal will sound 10 times and the icon
will disappear in the display.
You can cancel the reminder during setting by pres-
sing the button; After the reminder has been set,
you can cancel it by pressing the
appears in
key.
at the same time for 3 se-
key. If you
button twice.