Oven Interior - KKT KOLBE EB8012EDP Benutzerhandbuch

Oven interior

Pyrolytic cleaning
All heating elements are in operation. The cooking chamber is
heated to approx. 450 °C in order to burn down deposits on the
enamel. The process takes 1:30 - 2:00 hours. After the successful
pyrolysis you can simply sweep out the ashes.
Note: Pyrolysis is a pure cleaning aid. Because impurities are
not just pure grease, even after a pyrolysis process remains
some dirt that need to be cleaned.
Attention! During pyrolysis cleaning process you have to
!
remove all the interior accessories from the oven (including
telescopic rails), otherwise they can be damaged!
Oven Interior
5
4
2
1
3
2
6
Telescopic runners
(optional)
Telescopic drawer slides and other accesso-
!
ries become hot. Use potholders!
The oven has hook-in racks with telescopic slide rails
on 1 level.
• For onset of rust, baking sheet or roasting pan first pull out
the telescopic drawer slide.
• Store shelf unit, baking tray or roasting pan on the drawn-
out rail and push it by hand entirely in the oven until it
stops. The oven door always closes only when the telesco-
pic slide rail is fully inserted.
2
4
3
1
2
1
Construction
1 Hook-in racks with rack levels
2 Lighting
3 Fan with ring heater
4 Grill heating element
5 Top element
6 Bottom heat radiator (under the oven floor)
1 to 4 :
Shelf levels for shelf unit, baking tray or roasting pan. Ple-
ase note that the numbering of the rack levels from bottom
to top.
Case cooling
The case cooling ensures low temperatures on control panel,
switch knob and the oven door handle in heated oven.
The case cooling is turned on when a heating mode is set.
The air exits between the oven door and control panel.
450 °C
29