Installation And Connection Of The Appliance; Power Connection; Dimension Drawing; Installing The Appliance - KKT KOLBE EB8005ED Benutzerhandbuch

Installation and connection of the appliance

Connection and installation of the appliance

Power connection

!
Before connecting, check if the voltage indicated on the
rating plate corresponds to the mains voltage.
• The length of the connection cable must be sized so that
the device can be connected prior to insertion.
• The protective conductor must be dimensioned in such a
way that it is only subjected to tensile stress after the live
wires of the connecting cable, if the strain relief fails.

Dimension drawing

Installing the appliance

• The stability of the furniture must comply with DIN 68930.
• On the built-in niche no back wall may be present,
so that the ventilation is ensured.
• Push the device all the way into the niche.
• Open the oven door and fasten the left and right with the
supplied screws on the cabinet.
Do not overtighten the screws (by hand).
41