Installing The Appliance; Turning On The Appliance - KKT KOLBE BO8810SS Benutzerhandbuch

Installation and connection of the appliance

Installing the appliance

• The stability of the furniture must comply with DIN 68930.
• On the built-in niche no back wall may be present, so that
the ventilation is ensured.
• Push the appliance all the way into the niche.
• Open the oven door and fasten the left and right with the
supplied screws and sleeves on the cabinet.
Do not overtighten the screws (by hand).

Turning on the appliance

• Remove all packaging materials and transport protection,
especially from the cooking chamber, and peel off any pro-
tective film that may be present.
• Clean the oven and accessories with a damp cloth
and dry them well.
• Set the current time to the timer (see corresponding
chapter).
• Heat the empty oven to 200 °C for approx. 30 minutes with
top/bottom heat to burn any production residues on the
surfaces of the oven cavity.
The typical new odour that develops is unavoidable.
Keep the room well ventilated.
Wipe the cooking chamber clean with a damp cloth
and dry it well before use.
50