Automatic Timer; Energy Saving Function; General Operating Notes; Start / Pause / Cancel-Standby - KKT KOLBE EB8012EDP Benutzerhandbuch

Programming

Automatic timer

You can only use this function when you have set the
current time before.
• Push the key .
• By rotating the selection knob K1, choose your desired
target start hour. This value must be in an interval between
0 - 23.
• To confirm the setting, push the
• Now adjust the target starting minute by rotating the selec-
tion knob K2.
• Do not press the
key again, otherwise you have changed
the time. (Without confirming, make the other settings as
follows)
• Now select the the heating type by the function knob K1
and with the selection knob K2 the temperature. Then
push the key to confirm.
• Now choose a cooking time by rotating the function knob
K1 and correct the temperature by rotating the function
knob K2.
• Push the key again to confirm your selection. Now the
icon will appear instantly on the display. The target start
time can be checked by pushing the key . After 3 seconds,
the clock (last displayed value) will appear again.
• When the desired start time is reached, the appliance will
start working automatically, indicated by a buzzer sound.
• The icon will disappear from the display.
• During the status of reservation, press cancel
button once, time and temperature of reservation
menu will be shown with menu icon lighting cons-
tantly. Press again, screen returns to clock, or press
start button to return to reservation status.
• Reminder function is invalid during automatic timer
mode status.

Energy saving function

• Hold the key for 5 seconds. The display light will switch
off and stay in energy saving state.
• If no operation takes place within 10 minutes, the display
will also switch to energy saving state automatically.
• Pushing any key leads to an interruption of the energy
saving state.
General notes
• The oven lamp is activated for all the oven heating types
• If you have selected a heating type but didn't confirm
• To make sure that the appliance has recieved your touch
key again.
• When the baking process has finished, you'll hear a 5

Pyrolytic cleaning

With this function, the oven heats up to a very high tem-
perature (450 ° C) to make the cleaning easier.
• Rotate the function knob K1 to select the pyrolytic func-
• Touch
• Rotate the function knob K1 again to change the time
!
(except for pyrolytic cleaning)
by touching the within 5 minutes, current time will be
displayed again (Stand-By mode). The heating type you've
selected before will be lost.
operation correctly, a beep sound will occur.
times-buzzer.
Start / Pause / Cancel + Standby
• You can start your baking process by pressing .
• To pause the cooking process, simply press the -key
one time.
• To cancel the heating and baking process, press the
key a second time.
tion.
to confirm your selection. The standard time is
set to 2:00 hours. „PyR" is shown in the display.
adjustment. For the pyrolytic cleaning mode, the time can
only be set to 1:30 and 2:00 hours intervals.
• When the oven door is not closed, the appliance does
not allow the pyrolytic process to start.„door" and
„PyR" would appear on the screen.
• When the oven temperature is above 320 °C, the PCB
does not react to a touch of the key
will show „Cool" and „PyR". When the temperature
is below 200 °C, you can touch . When the tempe-
rature is higher than 200 °C, the oven will switch by
touching automatically after one touch in stand-by.
• For the pyrolytic cleaning, make sure that the
oven cavity is empty! This also means removing
the telescopic runners and the hook in racks.
Danger of burning!
• While the process is running, do NOT try to open
the door! Danger of burning!
• After the process has finished, do not disconnect
the appliance from the mains for 1 hour (Cooling)
. The display
33