Automatic Timer; Energy Saving Function; Start / Pause / Cancel - KKT KOLBE EB8013ED Bedienungsanleitung

Programming

Automatic timer

You can only use this function when you have set the
current time before.
• Push the key .
• By rotating the selection knob K1, choose your desired
target start hour. This value must be in an interval between
0 - 23.
• To confirm the setting, push the
• Now adjust the target starting minute by rotating the
selection knob K2.
• Do not press the
key again, otherwise you have changed
the time. (Without confirming, make the other settings as
follows)
• Now select the the heating type by the function knob K1
and with the selection knob K2 the temperature. Then
push the key to confirm.
• Now coose a cooking time by rotating the function knob K1
and correct the temperature by rotating the function knob
K2.
• Push the key again to confirm your selection. Now the
icon will appear instantly on the display. The target start
time can be checked by pushing the key . After 3 seconds,
the clock (last displayed value) will appear again.
• When the desired start time is reached, the appliance will
start working automatically, indicated by a buzzer sound.
• The icon will disappear from the display.
• During the status of reservation, press cancel
button once, time and temperature of reservation
menu will be shown with menu icon lighting cons-
tantly. Press again, screen returns to clock, or press
start button to return to reservation status.
• Reminder function is invalid during automatic timer
mode status.

Energy saving function

• Hold the key for 5 seconds. The display light will switch
off and stay in energy saving state.
• If no operation takes place within 10 minutes, the display
will also switch to energy saving state automatically.
• Pushing any key leads to an interruption of the energy
saving state.
General notes
• The oven lamp is activated for all the oven heating types
• If you have selected a heating type but didn't confirm
• To make sure that the appliance has recieved your touch
key again.
• When the baking process has finished, you'll hear a 5
Meat probe (AutoCook)
The core temperature sensor monitors the temperature
inside a dish (core). Here, a target temperature is deter-
mined. When a certain temperature has been reached in
this area, the dish is considered ready - the oven switches
off automatically.
• In waiting state, insert the meat probe, the LCD will display
• Select your desired oven function with the buttons K2.
• Sequence:
• Now press
• After that, spin the knob K1 to adjust the temperature.
• The small LCD display the temperature and the big LCD
(except for pyrolytic cleaning)
by touching the within 5 minutes, current time will be
displayed again (Stand-By mode). The heating type you've
selected before will be lost.
operation correctly, a beep sound will occur.
times-buzzer.
Start / Pause / Cancel + Standby
• You can start your baking process by pressing
• To pause the cooking process, simply press the
one time.
• To cancel the heating and baking process, press the
key a second time.
„PROB" and the icon .
to confirm the setting.
Here press the button ,too.
display „PROB".
1. The range of the temperature is between 50 and 150 °C.
2. During probe function, the cooking time can not be set.
3. To interrupt the cooking process, press the
button once. The display will flash. To cancel the
whole process, press the button
cooking process and return to the waiting mode.
4. If you pull out the meat probe, it will also cancel the
current working.
5. If the display shows „ER-3" after the programme has
been started, this means that there's a problem with the
temperature sensor.
.
-key
again to stop the
33