Programming; Clock Setting; Heating Type And Temperature Setting; Time Options - KKT KOLBE EB8016ED Benutzerhandbuch

Programming

Clock setting

After connecting the appliance to the power supply,
the display will show 00:00.
Clock setting
• Press the key; the hour figures will flash.
• Press the and keys to adjust the hour setting.
• Press the key; the minute figures will flash.
• Press the and keys to adjust the minutes setting
(time should be within 0–59).
• Press the key to finish the clock settings.
„:" will flash and the time will be illuminated.
Hints:
• The clock is set in 24-hour format. If the power
supply is interrupted, the time is reset to 00:00.
• The backlight of the clock turns off after about 10
minutes.

Heating type and temperature setting

• Press repeatedly until the icon of your desired heating
type lights up on the display.
Sequence:
• Press and , to adjust the time.
Hint:
The step quantities for the adjustment of time of the
coding switch are as follow:
0 – 0:30 : step 1 minute
0:30 – 9:00 : step 5 minutes.
• After that, when you press the
temperature using the and
Hint:
Step quantities for the adjustment of temperature
is 5 °C.
• Press , to confirm and to start operation.
Hint:
The temperature display will flash during the hea-
ting process. When the set target temperature is
reached, it is displayed continuously.
Modifying temperature or time while cooking
• Press the key 1x – the icon
Now you can modify the temperature by pressing the
and keys.
• Press the button key again, the icon
With the and keys you can adjust the time.
32
key, you can adjust the
keys.
will appear on the screen.
will disappear.

Time options

While the cooking process is running, it is possible to dis-
play the remaining time/target time/current time.
• Press the key during operation. Remaining cooking time,
end of cooking time and current time are displayed in
3-second intervals.
• Repeated pressing of the
the current time.

Reminder function

The oven has a 9-hours-reminder. This function will help
you to remind to start cooking in a certain time from 1 mi-
nute to 9 hours. Only when oven is in standby mode, the
reminder can be set. Follow below to set the reminder:
• Press the reminder setting key
• To set the time of the reminder, the
• Press to confirm the setting. „:" will flash, the indica-
tor for the reminder will be dispayed and the count-
down will be started.
Hint:
After the time has elapsed, an alarm signal sounds
10 times and the icon disappears from the
display.
You can cancel the reminder during setting by pres-
sing the key; after the reminder has been set, you
can cancel it by pressing it twice.

Start time preselection

The start time preselection feature is set as follows:
• First, set the end time at which the dish should be ready:
for example, 18:00.
• Then the cooking time can be entered:
Example 1 hour.
• The time for starting operation is calculated so that the set
cooking time runs out exactly at the set end of the cooking
time: According to the above examples, at 17:00.
You can only activate this function if the clock has been
set. In stand-by mode:
• Press the key 2 times, the display will show
• Use the and keys to set the target hour for the end of
cooking time.
• Press the key again.
• Use the and keys to set the target minute for the
end of cooking time.
• Press to choose the cooking function you require and
press and to set the cooking time.
key leads back to the display of
.
and keys.
und „End".