Installing The Appliance; Turning On The Appliance; What To Do In Case Of Problems - KKT KOLBE EB8016ED Benutzerhandbuch

Installation and connection of the appliance / Troubleshooting

Installing the appliance

• The stability of the furniture must comply with DIN 68930.
• On the built-in niche no back wall may be present, so that
the ventilation is ensured.
• Push the device all the way into the niche.
• Open the oven door and fasten the left and right with the
supplied four screws and sleeves on the cabinet. Do not
overtighten the screws.

Turning on the appliance

Remove all packaging materials and possibly remove protec-
tive films.
• Clean the oven and the accessories just moist.
• Set the current time to the timer (on some models only).
• Operate the empty oven for about 30 minutes with top
and bottom heat and maximum temperature. The resul-
ting typical smell of a brand is unavoidable. Please ven-
tilate the room.

What to do in case of problems?

!
Unqualified persons should not perform the repairs on this
unit because of electric shock and short circuit hazard.
Repairs generally should only be carried out by a licensed pro-
fessional.
The oven doesn't heat up.
Device fuse tripped in the house installation?
Have the temperature and heating type been set correctly?
The device fuse keeps blowing.
Call the KKT KOLBE Customer Service or a licensed electrician.
Lighting has failed.
The replacement of lighting is described in the previous chapter.
„AUTO" flashes in the display of the timer (on some
models only).
Hand button to switch the oven to manual operation.
I'm not satisfied with the baking results.
Have the hints and tips been followed in this manual?
38