Before First Use; Cleaning And Storage; Operation; Assembling Accessories - Silvercrest SSMS 600 E1 Bedienungsanleitung

Always operate the product
on an even, stable and clean
surface .
Always disconnect the
appliance from the power
supply if it is left unattended
and before assembling,
disassembling or cleaning .
m WARNING: Switch off the
appliance and disconnect from
power supply before changing
accessories or approaching
parts that move in use .

Cleaning and storage

The product shall not be
exposed to any dripping or
splashing water .
Refer to the "Cleaning and
care" section for instructions on
how to clean the product .
˜ Before first use
Remove all the packaging materials .
Clean the product (see "Cleaning and care") .
˜ Operation
˜ Assembling accessories
(ill . B)
Put the desired accessory ( 6 , 13 or 14)
on the drive 15 .
align with on the drive .
Turn the accessory until
32 GB/MT
on the accessory has to
aligns with .
Dismount all the accessories in reverse order .
˜ Turning the product on/off
m
WARNING: The product has an initial
rotary impulse . Hold the product firmly during

operation .

The speed regulator 2 can be rotated
steplessly to regulate the speed . Turn the
beam of the speed regulator to the desired
adjustment:
Speed scale 3
Speed regulator
Connect the power plug 1 to a suitable
mains socket .
Button
4 Speed according to
Press
and
hold
button
TURBO 5 Highest speed
Turning off the product: Release the pressed
button ( 4 or 5 ) .
2 Speed
5 (Highest)
4
3
2
1
(Lowest)
Setting
speed regulator 2
setting