Operation; Operating Elements En; Putting Out Of Operation; Maintenance And Cleaning - Abicor Binzel FES-200 Betriebsanleitung

FES-200

7 Operation

Provide sufficient ventilation during operation of the extraction system FES-200.
1 Plug the mains plug into the socket.
2 Switch the rotary switch (2) of the fume extraction system to the I position.
 Fig. 8 Operating elements on page EN-13
7.1 Operating elements
Manometer
1
Rotary switch
2
Operating elements
Fig. 8

8 Putting out of operation

1 Switch the rotary switch (2) of the fume extraction system to the 0 position.
2 Disconnect the system from the mains by unplugging the mains plug from the socket.
 Fig. 8 Operating elements on page EN-13

9 Maintenance and cleaning

Scheduled maintenance and cleaning is a prerequisite for a long life and a trouble-free operation.
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair work, the following instructions
must be adhered to:
• Switch off the power source.
• Close off the compressed air supply.
• Pull the mains plug.
CAUTION
1
5
Connection of mains connecting cable with plug
3
Fuse 250 V, 0.5 A
4
DANGER
2
4 3
Star-stop pliers connection (7/4-pole)
5
7 Operation
EN - 13