Techly I-ALARM-KIT002 Installationsanleitung Seite 46

Disarming by RFID tag
1. Press Arm ( ) or Home Mode ( )
on the keypad to unlock it.
2. Press [ ] to activate the RFID reader
for 10 seconds.
3. Within the next 10 seconds, swipe
the RFID tag in the front of the
reader to disarm the system.
The RFID reader turns off when a RFID tag is swiped in front of it, when the key [ ]
is pressed again on the keypad, or after 10 seconds without operation.
Home Mode
1. Press Arm ( ) or Home Mode ( ) on
the keypad to unlock it.
2. Type your user code or admin code.
3. Press the ( ) key. The LED indicator
blinks once, the keypad beeps once
and sends the signal to the control
panel to switch to Home Mode.
When the alarm panel receivers the signal, the siren beeps once and the Home
Mode indicator lights up: the alarm system is now in Home Mode.
All the sensors in regular zones are armed except those in the Home Mode zone.
The sensors in the Home Mode zone are disarmed so that users can move inside
their home.
46