Techly I-ALARM-KIT002 Installationsanleitung Seite 45

Usage
The keypad can be used as a remote control. Your user code or admin code will
be required before arming or disarming the system, or switching to Home Mode
or Mute Mode.
Arm the system
1. Press Arm ( ) or Home Mode ( ) on
the keypad to unlock it.
2. Type your user code or admin code.
3. Press the Arm key ( ). The LED
indicator blinks once, the keypad
beeps once and sends to the control
panel the signal to arm the system.
When the alarm panel receives the signal, the siren beeps once and the Arm
indicator on the control panel lights up. The alarm system is now armed.
Default admin code: 123456. Default user code: 1234
Disarming the system with the keypad
1. Press Arm ( ) or Home Mode ( ) on
the keypad to unlock it.
2. Type your user code or admin code.
3. Press the Disarm key ( ). The LED
indicator blinks once, the keypad
beeps once and sends to the control
panel the signal to disarm the
system.
When the control panel receives the signal, the siren beeps once and the Disrm
indicator lights up. The alarm system is now disarmed.
www.techly.com 45