Techly I-ALARM-KIT002 Installationsanleitung Seite 43

Register in the control panel
Make sure the control panel is in Connection Mode.
Press Arm ( ) or Home Mode ( ) on
the keypad to unlock it.
Type your user code or admin code on
the keypad, and then press any of the
Arm ( ), Disarm ( ) or Home Mode
( ) keys. Your hear short beeps: the
registration has succeeded.
Default admin code: 123456
Default user code: 1234
The control panel of your alarm system can be controlled from distance on the
keypad once the latter has been registrered in the control panel.
Connect to a siren
It can be connected to a indoor or outdoor siren, which enables you to trigger the
siren by pressin the [SOS] key on your keypad.
To connect the keypad to a siren, set the wireless siren to Connection Mode (refer
to the manual of you siren if necessary). Press the Arm ( ) or Home Mode ( ) keys
on the keypad to switch to Normal Mode. Then type [your admin code or user code]
and press any of the Arm ( ), Disarm ( ) or Home Mode ( ) keys on the keypad.
www.techly.com 43