Techly I-ALARM-KIT002 Installationsanleitung Seite 21

First operations
SMS Operations
IMPORTANT: BEFORE USING FOR THE FIRST TIME SAVE A PHONE NUMBER FOR SMS
NOTIFICATION VIA APP (Only stored numbers can control the system).
Insert a SIM card in the control panel before starting SMS operations. Make sure
the SIM card does not require any PIN code.
After above settings, you can arm or disarm the control panel via SMS when the
network of the control panel or your phone is disconnect. Also the stored number
can receive SMS notification for arm, disarm and alarm, etc...
Change the language
By default the language of the kit control panel is set to English. If you wish to
change the system language, refer to instructions "Change system language" on
page 15 (by APP) / 19 (by SMS) of this manual. "System language" refers to the
language of the SMS you receive from the control panel.
Arm/Disarm the system
The alarm system can be armed or disarmed by SMS, by App and by phone call.
By SMS
To arm the system: Send "1" by SMS to the number of your system's SIM card
To disarm the system: Send "0" by SMS to the number of your system's SIM card
By App
Click on "Arm" in the App to arm the system and "Disarm" to disarm the system.
The app is avaialble for download on the App Store and Google Play.
Register wireless accessories
1. Press the connection button att he back of the control panel to enter the
Connection Mode.
2. Trigger the accessory once within the next 15 seconds. You hear one beep: the
registration is successful.
If the accessory has already been registrered, the control panel will beep twice.
The first accessory registrered is assigned to zone 1, the second accessory
registrered is assigned to zone 2 etc. Zones 1 to 9 can be renamed. Zones 10 to 100
cannot be renamed (refer to the instructions on page 17 (by APP) or 26 (by SMS) to
learn how to rename zones).
www.techly.com 21