Techly I-ALARM-KIT002 Installationsanleitung Seite 44

Register an RFID tag
1. Press Arm ( ) or Home Mode ( ) on
the keypad to unlock it.
Then type your
enter Setup Mode.
Default admin code: 123456
If you hear 2 beeps, the code you have typed is wrong.
2. Type [41#]. You hear one beep and
the LED indicator lights up: the
keypad switched to Connection
mode.
3. Swipe the RFID tag in front of the
RFID reader. You hear one beep: the
connection is successfull.
If you hear two beeps, the RFID tag has
already been connected.
Press [ ] to exit Setup Mode.
To clear all registered RFID tags, press any of the Arm ( ) or Home Mode ( ) keys
on the keyboard to unlock it, and then type
beep: the RFID tags have been delected from the keypad.
44
[admin code+#] to
[admin code+#42#]. You hear one