Specifications - Techly I-ALARM-KIT002 Installationsanleitung

Emergency Mode
Regardless the status of the system,
the alarm is triggered when the SOS
button "SOS" is pressed on the remote
control.
At the same time, the control panel
sends a notification by SMS and dials
the pre-stored phone numbers.
Register in the control panel
Press the connection button on the back of the control panel to enter the
Conenction mode. Press any button of the remote control.

Specifications

Power supply
DC 3V (CR2025 button battery x1)
Static current
≤ 10uA
Operating current
≤ 7mA
Transmission distance
≤ 80 m (in open area)
Radio-frequency
433MHz (±75kHz)
Housing material
ABS plastic
Operating conditions
Temperature: -10°C~+55°C
Relative Humidity: ≤ 80%
(non-condensing)
Dimensions
57 x 31 x 11 mm
www.techly.com 31