Techly I-ALARM-KIT002 Installationsanleitung Seite 42

Setup
The wireless keybpad operates under 4 modes
Normal Mode
The LED indicator blinks once every 5 seconds.
Sleep Mode
Under Normal Mode, the keypad switches to Sleep Mode if no operation is made
for 35 seconds. Press the Arm ( ) or Home Mode ( ) keys to exit Sleep Mode.
When the keypad is in Sleep Mode, the LED indicator is off.
RFID Reader mode
Under Normal mode, press ( ) on the keypad to activate the RFID reader for 10
seconds: the LED indicator turns on. After 10 seconds, the LED light turns off as the
RFID reader turns off automatically.
Setup Mode
To enter Setup mode, switch to Normal Mode and then [your admin code + #] on
the keypad. The LED indicator blinks once every second. Press ( ) to exit Setup
mode and switch to Normal Mode.
After 30 seconds without operation, the keypad goes back to the Normal Mode.
Default admin code: 123456
Remark
Correct operation: 1 beep and the LED light blinks once.
Wrong operation: 2 beeps and LED light blinks twice.
42