Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
-
Open the case and remove the battery
activation strip.
-
Mount the sensor on the door and the magnet
on the door frame.
-
Make sure the magnet is placed above the
transmitter. Mount the magnet max. 1cm
away from the transmitter and secure the
transmitter and magnet with double-sided
tape or screws.
-
Avoid mounting the sensor in the areas with
a large amount of metal or electrical wiring
such as a furnace or utility room.
Specifications
Power supply
DC 1.5V (AA 1.5V LR6 battery x 1)
Static current
≤ 30 uA
Alarm current
≤ 40mA
Transmitting distance
≤80 m (in open area)
Radio-frequency
433 MHz (±75 KHz)
Housing material
ABS plastic
Operating conditions
Temperature: -10°C~55°C
Relative humidity: ≤ 80% (non-condensing)
Transmitter dimensions (LxWxH)
71 x 35 x 17.5 mm
Magnet dimensions (LxWxH)
51 x 12 x 13.5 mm
36
Werbung
Inhaltsverzeichnis
