Service; Gobo Change - JB-Lighting VARYSCAN 7 Bedienungsanleitung

Channel 22 no function
fade to zero during pan and tilt moves
fade to zero during gobo, colour or ,
prism changes
fade to zero during gobo, colour or
prism, focus changes
fade to zero during gobo, colour or prism,
changes and pan/tilt moves
fade to zero during gobo, colour or prism,
focus changes and pan/tilt moves
The fade-in/fade-out time can be adjusted from slow 5sec. to max.

5. Service

5.1 Gobo change

WARNING: Disconnect fixture from mains, and allow
hot lamp to cool down for at least 30 minutes!
Position head in horizontal position. Hinge no. 1 must be on the
upper side of the head. Turn screws no. 5 1/2 turn left and remove
plastic lid.
Loosen knurled head screw no. 3 and remove the gobo module.
The gobos are fixed by means of a spring. To change gobo remove
spring and gobo and insert the new gobo. Readjust the spring to fix
the gobo. Make sure that the blackned side of the metal gobo is
positioned opposide the lamp (in direction of the objective). If you
insert glass gobos make sure that the coated side is positionend
in opposide direction to the lamp.
If you want to order custom made gobos, have a look at the
technical diagram.
Image diameter: 48mm
Diameter: 51,8mm (+0/-0,2mm)
standard gobos:
DMX 000-095 00-50
DMX 096-127 60-7F
DMX 128-159
80-9F
DMX 160-191 A0-BF
DMX 192-223
C0-DF
DMX 224-255 C0-EF
2
1
3
31