System Requirements; Delivery Specification; Special Accessories - Bosch FSA 720 Betriebsanleitung

en 18 | FSA 70 | Product description
3.

System requirements

The following minimum requirements must be fulfilled
by the PC on which the system software MT-Module is
to be installed:

CPU Intel / AMD, 800 MHz or higher.

Windows operating system: WIN 2000 as from SP 4
and WIN XP - SP 1.

Minimum of 256 MB RAM main memory.

Minimum of 5 GB free hard drive space.

A free USB connection for the FSA 720 (recommend-
ed is a direct connection without any interposed
USB hub).

PS2-connection for connecting remote control
receiver. Please note hereto the specifications of
the laptop / PC manufacturers in the manual. Under
certain circumstances an additional specific adapter
cable may be required.

DVD disk drive for ESI[tronic].

Screen resolution: 800*600 with 256 colors or
higher.
i
When operating the FSA 720 measuring module
faults may occur, if the PC or other components (e.g.
mouse, connecting cables) are used that are not
provided by Bosch.
|
1 689 979 894 2007-01-30
3.3

Delivery specification

Description
FSA 720 measuring unit
Power pack
with main connection cable
USB connecting cable (2 m)
Temperature sensor car
Trigger clamp
Primary connecting cable UNI IV
Multi measuring cable CH1
Multi measuring cable CH2
Current clamp 1000 A
Sensors 3 * KV– / black
Sensors 3 * KV+ / red
Stroboscope
Connecting cable B+/B–
Hose line
Adapter cable for clip-on sensor
CD CompacSoft [plus]
DVD ESI[tronic] Diagnosis and Technology
CD (ToolsCATalogue)
Connection set for vacuum measurement
Cable tie (2*) for strain relief
(USB connecting cable and
power pack supply line)
Test prods black (2*)
Test prods red (3*)
Test prods black
Test prods red
Terminal clip black (3*)
FSA 720 Operating instructions
Important informations and safety instructions 1 689 979 922
*) Adapter cable 1 684 465 513 must always be connected be-
tween terminal socket FSA 720 / 740 (see Fig. 2; Pos. 4) and the
connecting cables for the clip-on sensor when measuring speed
with the clip-on sensor.
3.4

Special accessories

Information on special accessories, such as e.g. vehicle-
specific connecting cables, additional measuring ca-
bles and connecting cables can be obtained from your
Bosch representative.
Order number
1 687 022 911
1 687 022 890
1 684 461 106
1 684 465 507
1 687 230 036
1 687 224 957
1 684 462 211
1 684 460 258
1 684 460 259
1 687 224 968
1 687 224 848
1 687 224 849
1 687 022 767
1 684 460 195
1 680 712 234
1 684 465 513
*)
1 687 370 275
1 987 729 601
1 987 729 257
1 687 010 145
1 681 316 008
1 684 485 034
1 684 485 035
1 684 485 368
1 684 485 369
1 684 480 022
1 689 979 894
Bosch Diagnostics