Safety Information; Warnings - Fluke 917X Series Erste Schritte

917X Series Metrology Wells
Getting Started
Symbol
CAT

Safety Information

Use this instrument only as specified in this guide. Otherwise, the protection provided by the
instrument may be impaired. Refer to the safety information in the Warnings and Cautions
sections below.
The following definitions apply to the terms "Warning" and "Caution".
•
"Warning" identifies conditions and actions that may pose hazards to the user.
•
"Caution" identifies conditions and actions that may damage the instrument being used.

Warnings

To avoid personal injury, follow these guidelines.
2
Description
Fuse
PE Ground
Hot Surface (Burn Hazard)
Read the User's Guide (Important Information)
Off
On
Canadian Standards Association
OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per IEC1010-1 refers to
the level of Impulse Withstand Voltage protection provided. Equipment of OVERVOLTAGE
CATEGORY II is energy-consuming equipment to be supplied from the fixed installation.
Examples include household, office, and laboratory appliances.
C-TIC Australian EMC mark
The European Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC)
mark.