Auto Random Re-Start Function; Indicator Lights; Overall Checking - Acson CB Serie Installationsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

If there is a power cut when the unit is operating, it will automatically resume the same operating mode when the power is

restored. (Applicable only to units with this feature.)

Remote Control

When there is infrared remote control operating signal, the signal receiver on indoor unit will made a <beep> for signal

acceptance confirmation.

Error Description

Room Sensor Rrror

Pipe Water Sensor Error

Water Pump Error

Pipe Water Temperature Fault

*Window Open Activated

*Antifreeze Mode Activated

*Load Shedding Activated

*Only applicable for 4-pipe system

• Ensure the following, in particular:-

1. The unit is mounted solidly and rigid in position.

2. Piping and connections are leak proof.

3. Proper wiring has been done.

• Drainage check:– Pour some water into left side of drain pan

(drainage is at the right side of the unit).

• Test Run:

1. Conduct a test run after water drainage test and water

leakage test.

2. Watch out for the following:

a) Is the electric plug firmly inserted into the socket?

b) Is there any abnormal sound from unit?

c) Is there any abnormal vibration on the unit itself or piping?

d) Is the drainage of water smooth?