ELEKTRA MICRO CASA S1 Gebrauchsanweisung Seite 23

GENERAL DIRECTIONS AND SAFETY RULES
1) This booklet is an integral and essential part of the product and will have to be han-
ded to the end user.
Carefully read the warnings contained in this booklet as they supply important infor-
mation concerning safe installation, use and maintenance.
Store this booklet with care for any further need.
2) After removing the package ensure the appliance is whole and undamaged.
In case of doubt do not use the appliance and contact professionally qualified per-
sonnel.
The packaging materials (plastic bags, polystyrene, nails etc.) must not be left
within reach of children as they could represent potential hazards.
3) B e fore connecting the machine make sure that the data on the plate correspond
with those of the electric mains.
The plate is under the base of the machine.
Installation should be carried out in compliance with current regulations, according
to the manufacturer's instructions.
Incorrect installation may cause damage to people, animals or objects, for which the
manufacturer cannot be deemed responsible.
Electrical safety of this machine is obtained only when the same is connected cor-
rectly to an effectively grounded network, as set forth by current safety regulations.
It is necessary to comply with this fundamental safety pre-requisite and, in case of
doubt, request accurate checks of the plant by professionally qualified personnel.
The manu facturer cannot be deemed responsible for any damage caused by not
having grounded the machine.
Make sure that the current rating is suitable to the maximum power of the machine
as stated on the plate.
In case of doubt contact a professionally qualified person.
This trained person will, in particular, also have to check that the wire section of the
plant is suitable to the absorbed power of the machine.
It is not advisable to use adapters, multiple sockets and/or extender cords.
In case their use should be indispensable it is necessary to use only plugs, simple
or multiple adapters and extender cords complying with current safety regulations,
taking care not to exceed the current rating limit in current value, which is marked
on simple adapters and extender cords, and the maximum power limit marked on
the multiple adapter.
G B
28