Hoisting/Handling; Installation Clearances - SICE FIT LINE 32 2V Betriebsanleitung

4. HOISTING/HANDLING

In order to remove the machine from the pallet, hook it as shown in fig.6.
This hoisting point must be used whenever you need to change the installation position
of the machine. Do not attempt to move the machine until it has been disconnected from
the electricity and compressed air supply systems.

4.1 INSTALLATION CLEARANCES

The machine must be installed in accordance with all applicable safety regula-
tions, including but not limited to those issued by OSHA.
RISK OF EXPLOSION OR FIRE. Never use the machine in an area where it will be
exposed to flammable vapours (gasoline, paint thinners solvents, etc.). Never install
the machine in a recessed area or below floor level.
User Manual FITLINE 32 - 32 2V - 32 GP - 32 GP 2V
6-32 - 32 GP
WARNING
DANGER
UK
97