SICE FIT LINE 32 2V Betriebsanleitung Seite 116

- Step down partially on the pedal to inflate the tyre and seal beads with the inflation
hose. Frequently stop to check bead seating pressure on the gauge.
Avoid personal injury. Carefully read, understand and observe the following instruc-
tions.
1. Overinflated tyres can explode, producing hazardous flying debris that may result in
an accident.
2. Tyres and Rims that are not the same diameter are "mismatched". Never attempt to
mount or inflate any tyre and rim that are mismatched. For example, never mount a 16"
tyre on a 16.5" rim (or vice versa). This is very dangerous. A mismatched tyre and rim
could explode, resulting in an accident.
3. Never exceed the bead setting pressure (gauge on hose) provided by the tyre manu-
facturer, as stated on the sidewall of the tyre.
4. Never place your head or any part of your body over a tyre during the inflation process
or when attempting to seat beads.
This machine is not intended to be a restraining device for exploding tyres, tubes or rims.
5. Always stand back from the tyre changer when inflating, never lean over.
During this operation, noise levels assessed at 85 dB(A) may occur.
Wear hearing protection devices.
EXPLOSION HAZARD. An exploding tyre and rim may be propelled upward and
outward with enough force to cause serious injury or death.
Do not mount any tyre unless the tyre size (molded into the sidewall) matches the rim
size (stamped into the rim) exactly or if the rim or tyre are defective or damaged.
Never exceed the pressure recommended by the tire manufacturer.
This tyre changer is not a safety device and will not restrain exploding tyres and rims.
Keep the area clear of bystanders.
116
WARNING
WARNING
DANGER
FITLINE 32 - 32 2V - 32 GP - 32 GP 2V
User Manual