Cleaning And Maintenance - EuroLite LED KLS-180 Bedienungsanleitung

21-channel mode
Channel
1
Dimmer
2
Strobe speed
Spots
3
Program
Strobe LEDs
4
Strobe LEDs
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Programs via
DMX

CLEANING AND MAINTENANCE

The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Value Function
000 – 255 Increasing brightness 0 – 100%
000 – 009 No function
010 – 255 Strobe with increasing speed
000 – 009 No function
010 – 255 Internal program with increasing speed 0 – 100%
000 – 009 No function
010 – 255 Strobe with increasing speed 0 – 100%
000 – 255 Red
000 – 255 Green
000 – 255 Blue
000 – 255 White
000 – 255 Red
000 – 255 Green
000 – 255 Blue
000 – 255 White
000 – 255 Red
000 – 255 Green
000 – 255 Blue
000 – 255 White
000 – 255 Red
000 – 255 Green
000 – 255 Blue
000 – 255 White
000 – 009 No function
010 – 129 Auto mode via DMX with increasing speed
130 – 255 Sound mode via DMX with increasing speed
31/34
Spot 1
Spot 2
Spot 3
Spot 4
00126056, Version 1.0