MONIX Selecta Bedienungsanleitung Seite 13

Monix After Sales Services available spare parts
Do not modify any of the original parts of the pressure cooker, especially
the safety elements; this could make the safety elements ineffective. If
one or several parts do not correspond to the description that figures in
this guide, consult a technician to verify them.
Only use the parts from the manufacturer belonging to the
corresponding model.
Any repair must be performed by authorized personnel of the Monix
after-sales Services.
The silicone gasket can be replaced by the customer and Monix
recommends to replace it once a year.
Description
Subsidiary handle SELECTA
Lid handle mounted SELECTA
Body handle SELECTA
Gasket 4, 6, 7 L SELECTA
Gasket 9 L SELECTA
Safety valve SELECTA
Operation valve SELECTA
24
Reference
M957070
M957071
M957072
A990932
A990935
M957073
M957074
Use
Opening the lid
Push the button forward and turn the
upper part of the handle to the right (1),
until the arrow on the lid matches with
the other point located in the center of
the body handle (2).
In this position, lift the lid vertically and
the cooker will open.
Never try to open it without making
sure that steam has been released
completely.
Closing the lid
Place the lid on the body of the cooker,
making sure that the arrow on the lid
matches with the point on the lower handle
of the body (2).
Press the lid gently against the body.
Turn the lid handle to the left until both upper
and lower handles match and the opening
of the lid is blocked and the pressure cooker
cannot be opened (3).
If you heated the pressure cooker without
liquid inside, contact the MONIX after-sales
service for its verification.
25