Introduction; Proper Use; Features And Equipment - Parkside PPHSS 730 SE Bedienungs- Und Sicherheitshinweise

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
V ~
Volt (AC)
W
Watts (Effective power)
Jigsaw PPHSS 730 SE
© Introduction
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical pow-
er tools correctly. To help you do this please read
the accompanying operating instructions. Keep
these instructions in a safe place. If you pass the
device on to anyone else, please ensure that you
also pass on all the documentation.
©

Proper use

The device is suitable for making straight, curved
and bevel cuts in blocks or sheets of plastic, wood
and metal. The device is designed to be used in dry
rooms and for domestic purposes only. Observe the
advice about saw blade types. Any other use or
modification to the device shall be considered as
improper use and could give rise to considerable
dangers. The manufacturer will not accept liability
for loss or damage arising from improper use.
6 GB
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children away from electrical
power tools!
For indoor use only!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Dispose packaging and appliance in
an environmentally-friendly way!
©

Features and equipment

Pommel grip
1
ON / OFF switch (with stop)
2
Housing
3
Oscillation speed setting wheel
4
Mains connection lead
5
Ventilation grill
6
Dust extraction spout
7
Vacuum extraction duct (see Fig. B)
8
Base plate, light metal
9
10 Runner (removable)
Clamp screw
11
Pendulum action switch
12
Guide roller
13
Saw blade
14
Guide fence openings (with locking screws)
15
Chip guard
16
Contact guard
17
18 Quick-release chuck
19 Guide fence
Allen key
20
Stop pin (see Fig. B)
21