Drobo Fs And Drobopro Fs Settings; General Tab; Drobo Fs - Data Robotics DroboPro FS Bedienungsanleitung

Drobo FS or DroboPro FS and, if necessary, reset your unit back to the
factory settings. This will erase all data on the drives. You can also
reboot your FS array by clicking the "Restart" button. Additionally, this
page displays useful information about the device, including the serial
number and the installed versions of firmware and Drobo Dashboard. It
also provides an easy way to check for updates of Drobo Dashboard and
your unit's firmware. See page 30 for further details.

Drobo FS and DroboPro FS Settings

By clicking the "Settings" button on the Tools page, you can adjust a
host of settings to suit your individual needs for your FS array. You can
manage the shares on your device, set a login and password for the
administration of your device and set up email alerts. Also, this is where
you can enable dual disk redundancy, set the time period for disk drive
spin down and, on the Drobo FS only, dim the indicator lights.

General Tab

Drobo FS

19