Drobopro Fs Lights - Data Robotics DroboPro FS Bedienungsanleitung

DroboPro FS Lights

One of your Drobo storage device's many benefits is a series of lights
that tell you everything you need to know, without your having to
launch any application software on your computer. Remember, all
Drobo storage arrays are designed to actively monitor and protect your
data at all times. DroboPro FS will automatically take any necessary
actions whenever possible and display the following lights:
Drive Lights
Power Light
Activity Light
Capacity Gauge
Note: You can find information about the lights on the inside of the face plate.
14
Green: No action is required. All drives are healthy.
Solid Yellow: Add a drive or replace the current drive
with a larger drive soon. DroboPro FS is running out
of disk space.
Blinking Yellow and Green: Do not remove these
drives or power down. DroboPro FS is working to
protect your data.
Solid Red: Add a drive or replace the current drive
with a larger drive immediately. DroboPro FS is
critically low on space.
Blinking Red: Replace this drive immediately. This
drive has failed and needs to be replaced.
Green: The power is on and DroboPro FS is ready.
Red: DroboPro FS has overheated. Disconnect the
data cable and then the power cable. Let it cool
down and then restart.
Blinking Green: Data is actively being transferred
between your computer and DroboPro FS.
Blue: Displays the percentage of your DroboPro FS
that is full, in 10% increments.